30 Gallon "EZ KIT"



1 Month Shipping


All models are our base models, the same ones we have been building for the past 7 years.   Over the years we have developed add-ons which we know you will love.  Let’s talk about your first or last Made In America Copper Moonshine Still.  


1-502-337-3944  – Call or Text Us 24/7



A do-it-yourself kit (DIY) is a copper moonshine still manufactured by American Copper Works in Manchester New Hampshire. A DIY Kit is 20 oz. Sheet copper which is cut,  bent,  rolled and in embossed which leaves it ready to solder.  Clamping and Soldering  of the pieces is what is needed to complete the moonshine still.



This is not a project where you just solder the tubing pieces and you're done. This is a project that will take at least 4 to 8 hours to complete. When we get the copper in our shop,  we measure it,  cut it, bend it, roll it into a cylinder shape,  emboss it and ship it to the customer ready to clamp and solder. 

We include the flux and solder in the box as well as all the parts and fittings that you need to finish the unit. We do not include the propane tank the torch head for the propane tank. 

You can save a bunch of money with our kits. We specialize in 2 gallon kits all the way up to 100 gallon kits where the customer can actually save themselves hundreds of dollars.

once again this project is not easy. We estimate that it will take the average customer 4 to 8 hours to clamp and solder and complete the unit. You can check out our video on www.moonshinekits.com which is a 36 minute tutorial video as well as you can check out "KitBookLet) Which is an instruction booklet built for our customers. Thank you for being a part of American Copper Works.

 Please check out the complete description of each of our sizes on our websites. For example if you are intrested in a 6 gallon DIY Kit and are wondering the measurements of a 6 gallon you can check out our listing on any of our websites to see the specific measurements and specifications of the 6 gallon unit. 

Please keep in mind that all of our units come with the Upgraded Thumper and Worm kit. The Thumper is 9" by 12" cylindrically and the worm is a little bit bigger.  The coil is 3/8 coil and the tubing is 1/2 inch tube. The thickness of the copper used is 20 oz. / 22 gauge copper sheet purchased from Paul Revere out of Boston Mass which is 99.9% pure



30 gallon ez kit 
Pot body 36 inches tall, not including the cone.  The circle  for the  30 gallon pot  body is 16 inches.  This means your moonshine still  diameter will be 16 inches.  
Our cones have a steep slope and will add many inches of height to your distiller.  The cone comes pre  rolled and after you are completed soldering the cone  you will need to trim the top down.  Please see our  instructions  video.

The cap kit diameter is 5 inches.  This leaves more than enough space to fit your arm inside the unit for easy cleaning.  

The lyne arm 1 inch diameter pure  copper pipe and measures 16 inches in length.  The lyne arm is the part  that sticks  out of the cap and slopes down  at a 45 degree angle towards the thumper.

Our pipe  tubing kits are 1/2 inch diameter pure copper pipe.  All of the pipe is pre measured and cut to save you time.  Simply  flux and solder and distill. 
Our  thumper measures  9 inches in height and 9 inches in diameter.  This equals to about  2.2 gallons which is more than enough to give you the double purification that  you are looking for.  If you want a bigger one for a little more money, just ask and we can hook you up.

Our spin fittings are 1/2 inch spin unions.  You can easily  assemble and dis assemble your unit with the use of these convenient  spin fittings.  Our design is built so the user can take the thumper  out  and run the pot direct to the worm.  Please pay attention to the directions  to make sure your unit becomes  "interchangeable ".

Our worms are slightly  larger than our thumpers  measuring  2.6 gallons.  The condenser  comes with  two hose hook ups which are standard garden hose hook ups 3/4 inch male fittings.  It is simple to run water to from your worm. The worm comes with a 3/8 inch condending coil which  will have  at least 7 to 8 coil spins each unit to ensure  maximum cooling power.  

Our units also come with a temerature guage which  is easily  replaceable  incase  it ever fails  or breaks.  Our units come with flux for soldering as well  as enough  solder to finish your unit.  



1.       https://youtu.be/MRP0sDZvzaQ
Kit Presentation    
2.       https://youtu.be/N36IC77m-UU
Still Instructions for Use


1-502-337-3944  – Call or Text Us 24/7


Call Us  OR TEXT US 24/7


American Copper Works operates 5 locations across the east coast located in NH, TN, KY, NC, and GA who builds moonshine stills and ships them world wide.  If you are close to one of these states please let us know if you want to receive your order from our shops in NH, TN, KY, NC, or GA.  We are happy to offer you the service of customer pick up but also a more personalized and custom order experience.  Please reach out directly to our sales representative and ask for more information by calling  1-502-337-3944 and pressing 1.   We also accept text messages on this line so please text us about our products and communicate to us what we can build for you.

Our units can be upgraded with an ez seal cap on the pot as well as a 4 inch port on the thumper.  These two add ons are optional and not mandatory.  These two add ons make your unit more efficient and effective.  The easy seal cap makes it so you don’t need to apply wheat or flour paste on the pot to seal it every time.  You wont need to clean up any messy paste because you will have a food safe silicone gasket and a stainless steel butterfly clamp and 4 inch stainless ferrule added on the top of your pot.  This way you can seal your unit for the distillation process by a clamping system instead of the old school paste method.  Sealing it this way is highly efficient.  You can also add on the 4 inch port on the thumper as well.  It’s the same set up, 4 inch tri clamp, 4 inch gasket, 4 inch stainless ferrule and 4 inch stainless cap but this time it’s installed on the top of the thumper so you can infuse different flavors into your product.  Having the 4 inch port added on to the thumper also makes it a lot easier to clean the thumper when you decide to run different flavors through the distiller.  If you see the words “top end” model on any of our websites, that is the model with the ez seal cap and 4 inch port on the thumper.  If you want to make sure your order has these add ons or any other custom requests please call 1-502-337-3944 and press 1.  We also accept text messages on this line so please text us about our products and communicate to us what we can build for you.

LIFETIME WARRANTY.  Completely Made in USA. Lowest Priced.  Complete Unit, Ready to Run. 

8 Years Experience Building Distillation Equipment. 

FREE SHIPPING.   Highest Quality.  24/7 Customer Support.  Instructions Included.  


 Don't Get Left Un-Prepared.  A Moonshine Still is a Tool For Survival.



"The Wife May Say NO, But The Moon-Shining In Her Eyes Says YES."


  • Manufacturer: American Copper Works
  • Condition: New
  * Marked fields are required.
Price $599.00
Reviews (10) Write a Review
No Reviews. Write a Review